• etchinghillside@reddthat.com
    link
    fedilink
    English
    arrow-up
    6
    arrow-down
    1
    ·
    4 months ago

    My mind forgot that M.2 is probably more prevalent these days and that they’re not just shutting down for no reason.

    • Hubi@feddit.org
      link
      fedilink
      English
      arrow-up
      4
      ·
      4 months ago

      Is it though? Pretty much every single current-gen mainboard still comes with a number of SATA ports.

      • RamRabbit@lemmy.world
        link
        fedilink
        English
        arrow-up
        2
        ·
        edit-2
        4 months ago

        Everyone is going to buy M.2 SSDs first, and only buy SATA if they don’t have enough M.2 slots. I really doubt SATA SSDs are selling well.

        With that said, I don’t see SATA going anywhere. It’s (comparatively low) bandwidth means you can throw a few ports on your board and not sacrifice much. For some quick math: a M.2 port back-hauled by PCIe 4.0 x4 has 7.8 GB/s of data lines going to it. While SATA 6.0 has only 0.75 GB/s of data lines going to it.

        • tburkhol@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          4 months ago

          SATA is really convenient for larger storage, though. I keep my OS on nvmes, but I’ve got a couple of SATA drive and a hot swap bay for games, media, etc.

          • clif@lemmy.world
            link
            fedilink
            English
            arrow-up
            1
            ·
            edit-2
            4 months ago

            I’m still running SATA spinny disks for my big-ish data. I can’t afford a 16TB SSD…

            I know that’s off topic, but HDDs are still a thing too.

            • RamRabbit@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              4 months ago

              I’m very excited for the day I can replace my spinners with SSDs. That day is coming, but it is not today.

          • Spaz@lemmy.world
            link
            fedilink
            English
            arrow-up
            0
            ·
            4 months ago

            Higher spec boards dont have this issue; Typically an issue with low and mid range boards due to cost savings.

            • AlfredoJohn@sh.itjust.works
              link
              fedilink
              English
              arrow-up
              1
              ·
              4 months ago

              Which just also shows why this is a very anti consumer move. Its trying to artifically push people to by new hardware because there hasn’t been significant enough changes to really warrant it. This then means more people who might have swapped off of windows to keep their existing hardware might end up having to upgrade then stick with their familiar windows platform so that the ai bubble can continue. Its completely fucked up

        • DFX4509B@lemmy.wtf
          link
          fedilink
          English
          arrow-up
          0
          ·
          4 months ago

          Even then, NVMe riser cards are a thing to just stick an NVMe drive in a spare PCIe slot.

          • Trainguyrom@reddthat.com
            link
            fedilink
            English
            arrow-up
            1
            ·
            4 months ago

            Does require you to have the PCIe lanes for it, BIOS support for booting to PCIe (which Intel 6th gen core CPUs were the first to support. 4th gen never did but some had m.2 slots and NVMe support for secondary drives and the 5th gen X99s had some receive BIOS updates to support but that’s its own can of worms) and both Intel and AMD have historically been pretty bad about being stingy about PCIe lane availability

            Plus to run more than a single NVMe on a single slot your motherboard either needs to support PCIe bifurcation which is almost exclusively an enterprise feature or they need to have the right lane configuration available to support that x16 slot handing out 4x4 lanes (or 2x8/2x4 for dual NVMe)